Have a brick house? No worries, there are two install methods that you can use to hang your Entry Envy sign. The first is with multi-material screws and a special drill bit for brick that to actually screw into the brick. 

The second method is for these brick clips to actually clip on the brick. When ordering these ($12 per pair), we will automatically modify your sign to accommodate hanging by this design with D-ring brackets and a wire. Each exterior sign weighs approximately 6 lbs. We recommend the brick clips for horizontal signs. The length of the vertical may them too wobbly if in a windy location. The problem can be solved with a screw at the bottom of the sign to hold it secure, which somewhat defeats the purpose of a brick clip, but it's one hole instead of three in the brick. If you decide to go this route or try it without the screw and decide you better put one in, then make a trip to the hardware store or order the carbide drill bit on our site to pre-drill the hole you will need before securing to the brick. Here is the link to several install videos that may be helpful depending on your home. Feel free to reach out if questions to jennifer@entryenvy.com. 

In a windy location, screws are recommended because they will hold the sign snug to the house rather than the brick clips. Sometimes this is a trial & error process! Please feel free to email us with any questions at social@entry-envy.com. We are happy to help!